October 9, 2024
PET

TYLOSE MHS 30027 P6

 

TYLOSE MHS 30027 P6

TYLOSE MHS 30027 P6

Tylose MHS 30027 P6 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. It displays very fast consistency development, moderate sag resistance and water demand, high water retention and heat stability, and low influence on cement hydration.
Tylose MHS 30027 P6 is ideal for use in cement renders and EIFSs.
Tylose MHS 30027 P6 is a medium viscosity, modified methyl hydroxyethyl cellulose.

Application properties of Tylose MHS 30027 P6:
Tylose MHS 30027 P6 is mainly recommended for cementitious base renders.
Tylose MHS 30027 P6 ensures sufficient water retention and gives good adhesion strength.
The special modification provides an easy and non-sticky workability.
The retarding effect on the setting time of the cement is minimised.

Physical state : Solid
Appearance : Powder.
Colour : whitish
Odour : odourless
Odour threshold : No data available
pH : 6 – 8 10g/l
Relative evaporation rate (butylacetate=1) : Not specifically applicable
Melting point / Freezing point : Melting point: Not specifically applicable
Freezing point: Not specifically applicable
Boiling point : Not specifically applicable

Flash point : Not specifically applicable
Auto-ignition temperature : > 170 °C
Flammability (solid, gas) : No data available
Vapour pressure : Vapour pressure: Not specifically applicable
Vapour pressure at 50 °C: Not specifically applicable
Relative density : Relative vapour density at 20 °C: Not specifically applicable
Density : Density: 1.1 – 1.5 g/cm³ 20 °C
Relative density: Not specifically applicable
Solubility : Water: > 10 g/l @ 20°C
Log Pow : < 0

Viscosity, kinematic : Not specifically applicable
Viscosity, dynamic : Not specifically applicable
Explosive properties : Product is not explosive. Dust may form explosive mixture in air.
Explosive limits : No data available
Minimum ignition energy : > 10 mJ
Fat solubility : No data available
Conbustion class : 5
Smoldering temperature : >450 °C
pmax : 10 bar
Dust explosion category : ST1
KSt : < 200 bar*m/s
Ignition temperature : > 400 °C

Tylose MHEC (methyl hydroxyethyl cellulose/Tylose MH-grades) are water soluble, nonionic cellulose ethers, which are offered as free flowing powder or in granular form.
Tylose MHEC may contain further additives which for example control the dissolution behavior or the thickening power.

Product form : Mixture
Product name : Tylose MHS 30027 P6
Product code : MHEC_M

Recommended use :
Rheological Additive
Special applications
Coating material
Additive for mortar

Consistency development: very fast
Final consistency: moderate
Sag resistance: moderate
Water demand: moderate
Water retention: high
Cement retardation: low
Heat stability: high

Restrictions on use : There is no information available on applications that are not advised

First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Call a doctor.
First-aid measures after skin contact : Wash skin with plenty of water.
First-aid measures after eye contact : Rinse immediately with plenty of water, also under the eyelids. Consult an ophthalmologist if irritation persists.
First-aid measures after ingestion : Rinse mouth. If symptoms persist, call a physician

Symptoms/effects after skin contact : May cause sensitisation of susceptible persons by skin contact.
Symptoms/effects after eye contact : May cause eye irritation.

Precautions for safe handling : Ensure good ventilation of the work station. Wear personal protective equipment. Avoid dust formation.
Dust may form explosive mixture in air. Keep away from sources of ignition – No smoking.
Hygiene measures : Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Storage conditions : Material is hygroscopic. Protect from atmospheric moisture and water.
Information on mixed storage : No special storage requirements.

Recommended fields of application
-Cement renders
-Skim coats
-Adhesives for block laying

Tylose MB grades:
Tylose MB 15009 P2
Tylose MB 60000 P2

Tylose MH grades:
Tylose MH 50 G4
Tylose MH 200 YP2
Tylose MH 300 P2
Tylose MH 2000 YP2
Tylose MH 4000 KG4
Tylose MH 6000 YG8
Tylose MH 6000 YP4
Tylose MH 6002 P4
Tylose MH 10000 KG4
Tylose MH 10007 P4
Tylose MH 15000 YP4
Tylose MH 15002 P6
Tylose MH 15018 P4
Tylose MH 20006 P4
Tylose MH 20009 P2
Tylose MH 30000 YG8
Tylose MH 30000 YP4
Tylose MH 30026 P4
Tylose MH 60000 P6
Tylose MH 60001 P4
Tylose MH 60001 P6
Tylose MH 60004 P6
Tylose MH 60009 P4
Tylose MH 60010 P4
Tylose MH 100001 P6
Tylose MHBS 60000 YP4
Tylose MH 300003 P6

Tylose MHE grades:
Tylose MHE 60000 YP4

Tylose MHF grades:
Tylose MHF 10015 P4
Tylose MHF 10016 P4
Tylose MHF 20007 P4
Tylose MHF 20010 P4
Tylose MHF 60028 P6
Tylose MHF 150013 P6

Tylose MHS grades:
Tylose MHS 10012 P6
Tylose MHS 30024 P4
Tylose MHS 30027 P6
Tylose MHS 60000 YP4
Tylose MHS 100005 P3
Tylose MHS 100006 P3
Tylose MHS 150003 P4
Tylose MHS 150012 P4
Tylose MHS 300000 P4

Special grades:
Tylose CER 406001
Tylose E 510024
Tylose E 514016

Tylose MHS 30027 P6 Product properties:
Composition: methylhydroxyethyl modified cellulose
Form: white powder
Etherification: etherification standard
Grain size: fine powder
Delayed solubility: not
Modification: very high
Viscosity level (according to Höppler): 30,000 mPas

Packaging, storage, safety instructions
As with all organic powdered substances, cellulose ethers pose a dust explosion hazard.
To avoid flammable dust-air mixtures, the risk of dust generation and accumulation must be minimized.
Avoid fire sources such as open flames, hot surfaces, sparks, electrical disturbances.
Tylose begins to decompose at around 200 ° C.
The flash point is greater than 360 ° C.
Tylose burns easily and the fire may spread.
Tylose can be stored for a long time if kept in a closed container or in its original packaging, in a dry place at room temperature.
For high-viscosity types, slight loss of viscosity may occur after long-term storage (more than 1 year).
Tylose absorbs water from humid air.
The opened container must be resealed.

Inquiry