October 15, 2024
PET

TYLOSE MH 2000 YP2

TYLOSE MH 2000 YP2

TYLOSE MH 2000 YP2

CAS No. : 9004-62-0
EC No. : 618-387-5

Tylose MH 2000 YP2 is a water-soluble, non-ionic methyl hydroxyethyl cellulose powder with standard etherification.
Tylose MH 2000 YP2 provides increased biostability, low gloss appearance, good anti-spattering properties, and moderate wet scrub resistance.
This grade of methyl hydroxyethyl cellulose (MHEC), Tylose MH 2000 YP2 , is ideal for use in cement paints, distempers, and lime-wash paints.

Methylhydroxyethyl cellulose.
Tylose MH 2000 YP2 offers very high water retention, low gloss, low pigment compatibility, low pseudoplasticity, moderate thickening effect, and moderate wet scrub resistance.
Tylose MH 2000 YP2 exhibits good anti-spattering.
Tylose MH 2000 YP2 is used for paint applications like solid paints, powder paints, limewash paints, cement paints, distempers, and emulsion based plasters.

Recommended uses of Tylose MH 2000 YP2 :
-Rheological Additive
-Special applications
-Coating material

Tylose MHEC (methyl hydroxyethyl cellulose/Tylose MH-grades) are water soluble, nonionic cellulose ethers, which are offered as free flowing powder or in granular form.
Tylose MHEC may contain further additives which for example control the dissolution behavior or the thickening power.

Tylose MH 2000 YP2 properties:
Composition: Methylhydroxyethyl cellulose
Appearance: white granules
Etherification: standard etherification
Grain size: granules
Delayed solubility: yes
Biostability: yes
Viscosity level (Höppler): 10,000 mPas

Physical state : Solid
Appearance : Powder.
Colour : whitish
Tylose MH 2000 YP2 Odour : odourless

Odour threshold : No data available
Tylose MH 2000 YP2 pH : 6 – 8 10g/l
Tylose MH 2000 YP2 Relative evaporation rate (butylacetate=1) : Not specifically applicable
Tylose MH 2000 YP2 Melting point / Freezing point : Melting point: Not specifically applicable
Tylose MH 2000 YP2 Freezing point: Not specifically applicable
Tylose MH 2000 YP2 Boiling point : Not specifically applicable
Tylose MH 2000 YP2 Flash point : Not specifically applicable
Auto-ignition temperature : > 170 °C
Flammability (solid, gas) : No data available

Tylose MH 2000 YP2 Constitution: Methyl hydroxyethyl cellulose
Tylose MH 2000 YP2 Appearance: powder
Etherification: standard
Tylose MH 2000 YP2 Particle size: powder
Delayed solubility: yes
Level of viscosity: according to Höppler 2000 mPa•s

Tylose MH 2000 YP2 Vapour pressure : Vapour pressure: Not specifically applicable
Relative density : Relative vapour density at 20 °C: Not specifically applicable
Tylose MH 2000 YP2 Density : Density: 1.1 – 1.5 g/cm³ 20 °C
Relative density: Not specifically applicable
Solubility : Water: > 10 g/l @ 20°C
Log Pow : < 1
Viscosity, kinematic : Not specifically applicable
Viscosity, dynamic : Not specifically applicable

Explosive properties : Product is not explosive. Dust may form explosive mixture in air.
Explosive limits : No data available
Minimum ignition energy : > 10 mJ
Fat solubility : No data available
Conbustion class : 5

Smoldering temperature : >450 °C
pmax : 10 bar
Dust explosion category : ST1
KSt : < 200 bar*m/s
Ignition temperature : > 400 °C

Tylose MH 2000 YP2 specification:
Tylose MH 2000 YP2 Moisture: ≤10%
NaCl content: ≤1.5%
Grain size: <500 µm: min. 90%
Grain size: <125µm: max. twenty%
Viscosity: 8,000 – 12,000 mPas
Brookfield RV, 20 µM, 1.9% 20 ° C, 20 ° GH

Biostability: yes
Gloss: low
Pigment Compatibility: low
Anti-spattering: good
Pseudoplasticity: low
Thickening effect: low
Wet scrub resistance: moderate
Water retention: low

Additional data about Tylose MH 2000 YP2:
Bulk density: approx. 400 g / l
Etherification (MS / DS): approx. 0.15 / ca. 1.70
Swelling time: approx. 3 min.
Final dissolving time: approx. 40 min.

Applications of Tylose MH 2000 YP2:
Powder paints
Lime paints
Cement paints
Water paints
Emulsion plaster
Joints
Self-leveling floors
Tylose MH 2000 YP2 Action: Gloss low
The ability to mix the pigment homogeneously (Pigment compatibility): low
Anti-spattering properties (Anti-Spattering): Good
Pseudoplasticity: low

Thickening effect: moderate
Strength wet scrubbing (wet scrub resistance): moderate
Tylose MH 2000 YP2 Water retention: very high

Packaging, storage, safety instructions of Tylose MH 2000 YP2:
As with all organic powdered substances, cellulose ethers pose a dust explosion hazard.
To avoid flammable dust-air mixtures, the risk of dust formation and accumulation must be minimized.

Avoid fire sources such as open flames, hot surfaces, sparks, electrical disturbances.
Tylose begins to decompose at around 200˚C.
The flash point is greater than 360˚C.

Tylose MH 2000 YP2 for use in construction
Restrictions on use : There is no information available on applications that are not advised

Tylose burns easily and the fire can spread.
Tylose can be stored for a long time if stored in a closed container or in Tylose MH 2000 YP2s original packaging, in a dry place at room temperature.
For high-viscosity types, slight loss of viscosity may occur after long-term storage (more than 1 year).
Tylose absorbs water from humid air.
The opened container must be resealed.

Inquiry