RONGALIT C
RONGALIT C
RONGALIT C = Sodium formaldehydesulfoxylate = Sodium hydroxymethanesulfinate = sodium oxymethylene sulfoxylate = Brüggolit
Rongalit Discharge C = Previously Rongalit C
Rongalit C is Discharge and reducing agent for use in discharge printing
Rongalit C is used in Direct printing and two phase process with vat dyestuffs.
Rongalit C is in Discharge printing on dyed cellulosic fabrics.
Rongalit C is used in vat dyeing as a reducing agent, in redox polymerization initiator systems, and for aquarium water conditioning.
Rongalit C is Colour discharge printing agent on cotton and synthetic fabrics
Rongalit C provides a unique versatility of printing on both cotton and synthetics due to the exceptional stability over long periods and high compatibility with various print systems.
Sodium formaldehyde sulfoxylate is also a polymerization initiators.
Rongalit C is a concentrated reducing agent used as a redox catalyst in emulsion polymerization of many types of synthetic rubber.
Rongalit C is also widely used in the reductive clearing of disperse dyed synthetic fiber.
Textile: Rongalit C is used as a discharge printing agent on cotton and synthetic fibers
Polymer: Rongalit C is Used as a redox catalyst in emulsion polymerisation process for manufacturing ABS, SBR, X-SBR, NBR, CR, PVC-latices, PVA, EVCL, vinyl acrylate, and styrene acetate.
Pharmaceuticals: Rongalit C is used as a stabilizer / antioxidant in a wide range of drug formulations
Sodium formaldehyde sulfoxylate is generally used as an industrial bleaching agent for textiles, molasses, and soaps. It also has a niche use as a water conditioner, reducing the amount of chlorine, and in pharmaceuticals as an antioxidant.
EC / List no.: 205-739-4
CAS no.: 149-44-0
Sodium hydroxymethanesulfinate is called Rongalite C.
Calcium hydroxymethanesulfinate is called Rongalite H.
The zinc complex Zn(HOCH2SO2)2 is marketed under the trademarks Decroline, Decolin, and Safolin.
This compound is an additive in polymers and textiles.
Rongalite, also called Rongalit is sodium hydroxymethylsulfinate, or Na+HOCH2SO2-.
The salt has many names, including also sodium formaldehyde sulfoxylate. It is water-soluble and generally sold as the dihydrate
Sodium formaldehyde sulfoxylate is a white solid chemical, soluble in water.
Sodium formaldehyde sulfoxylate is generally used as an industrial bleaching agent for textiles, molasses, and soaps.
Sodium formaldehyde sulfoxylate also has a niche use as a water conditioner, reducing the amount of chlorine, and in pharmaceuticals as an antioxidant.
Rongalite, also called Rongalit (registered trademark of BASF), is sodium hydroxymethylsulfinate, or Na+HOCH2SO2−. The salt has many names, including also sodium formaldehyde sulfoxylate, and Bruggolite. It is listed in the European Cosmetics Directive as sodium oxymethylene sulfoxylate (INCI). It is water-soluble and generally sold as the dihydrate. The compound and its derivatives are widely used in the dye industry.
Chemical formula: CH3NaO3S
Molar mass: 118.10 g/mol
154.14 g/mol, dihydrate
Appearance: colorless crystals
Density: 1.75 g/cm3, dihydrate
Melting point: 64.5 °C (148.1 °F; 337.6 K) dihydrate
Solubility in water: 600 g/L, dihydrate (approximate)
Acidity (pKa): decomposes at low pH
CAS Reg. No.: 149-44-0
Sodium formaldehyde sulphoxylate is the sodium salt of formaldehyde sulphoxylic acid. When pure it crystallizes with two molecules of water, having the following formula: OHCH2.SO2.Na.2H20.
It is a very strong reducing agent. The product as ordinarily obtained is unstable in the presence of acids and strong alkalies and slowly decomposes in the presence of atmospheric oxygen forming thiosulphates, sulphites and free sulphur which react with the formaldehyde to form products having a strong garlic-like odor. Decomposition can be detected readily by this strong peculiar garlic-like odor.
The preparation of sodium formaldehyde sulphoxylate by reduction of formaldehyde bisulphite with zinc dust and acetic acid is described in Ber. 38, 1076; 1905. The technical product, as used Sin commerce, occurs in white irregular lumps and is said to be stabilized by addition of excess formaldehyde and excess alkali (sodium hydroxide).
The technical product is thus considered to be more stable than the pure crystalline product.
Rongalit Discharge C= Previously Rongalit C
Rongalit Discharge C is Discharge and reducing agent for use in discharge printing
Rongalit Discharge C is used in Direct printing and two phase process with vat dyestuffs.
Rongalit Discharge C is in Discharge printing on dyed cellulosic fabrics.
Chemical Character: Sulfinic acid derivative
Physical form: White powder
Shelf life: Can be stored in the original sealed containers and in good conditions for 24 months.
Opened containers should be used up as quickly as possible and should be properly resealed after use
Avoid moist conditions and should not be stored together with oxidising agents or acids.
Note on storage As the product is hygroscopic, the product should be stored in dry, acid free and in conditions which are not too warm.
Remove from containers with dry equipment (i.e. scoops).
Properties
Product specification Tolerances for test characteristics are given in the product specification.
Decomposition temperature: From > 50 °C. Above this temperature, a thermal decomposition is possible.
pH value: Approx. 10 (10 % aqueous solution)
Solubility in water (20 °C): Approx. 600 g/l in water has good solubility; the dissolving process is endotherm.
Stability: Good stability with alkalis
In neutral or alkaline print thickeners, the product is stable for long periods.
With acids, Rongalit Discharge C decomposes. Decomposition by acids and oxidation are exothermic.
Note: The product property data merely provide an indication of how the product is to be used.
They do not constitute the agreed quality of the prod- uct, nor are they the object of regular quality control tests
1. Direct printing with vat dyestuffs
Application
For direct printing with vat dyestuffs, a stock thickening is used contain- ing 130 – 140 g/kg Rongalit Discharge C and also the same amount of 1,1 potash.
Potash can be wholly or partly substituted by soda ash. 100 parts of potash can be replaced by 75 of soda ash.
Example of the stock thickening: 550 g Thickener
30-50g Glycerine
130 g Potash or 100 g Soda ash 130 g Rongalit Discharge C
… g Water or thickening 1000 g
Due to its good solubility, Rongalit Discharge C can be added directly to the thickening with stirring
The thickener should be set with a neutral or alkaline pH.
The above quantities relate to rotary screen printing. In flat screen print- ing the reducing agent and the alkali can be reduced by 20%.
The actual print colour has the following composition:
… g Vat dyestuff (Printing grades!) 650 g Stock thickening
… g Water or thickening 1000 g
After printing and drying the fabric is steamed for 8 – 12 minutes with saturated steam (102 ºC, „air free “).
2. Coloured discharges with vat dyes on dischargeable dyed cellulose fibres
For coloured discharge printing with vat dyes on dischargeable dyeings on cellulosic fibres the above stock thickening is also very well suited. Depending on the dischargeability and colour depth of the dyed ground, it may be necessary to increase the proportion of Rongalit Discharge C and possibly also to increase the amount of potash and / or soda ash.
3. White discharge prints on dischargeable dyeings on cellulose fibres
For white discharge prints, Rongalit Discharge C has proved successful as discharge agent and reducing agent.
Example for the composition of white discharge pastes:
Paste „A“ Paste „B“
Thickener: 500 g 500 g
Rongalit Discharge C: 150 g 200 g
Suitable discharge resistant optical brightener: 10 g 10 g
Mix together, then
Caustic soda 38 °Bé – 40 g
Soda ash – 40 g
Water or thickening to 340 g 210 g 1000 g
White discharge paste „A“ is intended for discharge prints on easily dis- chargeable dyeings with substantive and reactive dyes.
Print paste „B“ is for white discharge prints on dyeings with more difficult to discharge reactive dyes and naphthol combinations. Also in this case the caustic soda may be wholly or partly replaced by soda ash.
After drying steaming is carried out for 8–10 minutes with saturated steam (102 ºC, „air free“).
4. Two phase printing process with vat dyes
Two phase printing process is another application area for Rongalit Discharge C. In comparison to Rongalit Reducer 2PHA (previously Rongalit 2PHA) + Rongalit Reducer 2PHB Liq. (previously Rongalit 2PHB Liquid), which were specially developed for the two phase process with vat dyes, Rongalit Discharge C is a slower reaction. It takes a longer steaming time and the product is therefore particularly suitable for textile printers who do not have the opportunity to fix the vat dyes in a special two-phase shock (Flash ager) within a few seconds,
Application rate. 100 g Rongalit Discharge C
The printed and dried fabrics are padded in a padding mangle and steamed for 5–7 minutes with saturated steam or slightly superheated steam (110–115 °C). Finally the fabric is rinsed, alkaline re-oxidised and given a boiling soaping treatment. An addition of acid is made to the soaping bath or one of the following soaping baths.
Conversion table The following table can be used to convert the amount of caustic soda in
the corresponding volume or by unit of weight of sodium hydroxide solu- tion.
100 g caustic soda (fixed) correspond to:
347 g or 263 ml NaOH 35 °Bé = 64,0 °TW
307 g or 227 ml NaOH 38 °Bé = 71,4 °TW
286 g or 206 ml NaOH 40 °Bé = 76,6 °TW
238 g or 164 ml NaOH 45 °Bé = 90,6 °TW
214 g or 143 ml NaOH 48 °Bé = 99,6 °TW
206 g or 136 ml NaOH 49 °Bé = 102,8 °TW
200 g or 130 ml NaOH 50 °Bé = 106,0 °TW
Note Thorough after-washing of the print is essential Safety
When using this product, the information and advice given in our Safety Data Sheet should be observed. Due attention should also be given to the precautions necessary for handling chemicals
Sodium formaldehyde sulfoxylate [Wiki]
149-44-0 [RN]
205-739-4 [EINECS]
Formaldehydesulfoxylic acid sodium salt
Hydroxyméthanesulfinate de sodium [French] [ACD/IUPAC Name]
Hydroxymethanesulfinic acid sodium salt
Methanesulfinic acid, 1-hydroxy-, sodium salt (1:1) [ACD/Index Name]
MONOSODIUM HYDROXYMETHANESULFINATE
Natriumhydroxymethansulfinat [German] [ACD/IUPAC Name]
Oxymethansulfinsaeuren natrium [German]
Rongalit [Trade name]
Sodium (hydroxymethyl)sulfinate
sodium formaldehyde sulphoxylate
Sodium formaldehydesulfoxylate
Sodium hydroxymethanesulfinate [ACD/IUPAC Name]
sodium hydroxymethanesulfinate (1:1)
Sodium hydroxymethanesulphinate
Sodium hydroxymethanesulphonate
sodium oxymethylene sulfoxylate
UNII-X4ZGP7K714
X4ZGP7K714
Aldanil
Bleachit D
C.I. Reducing Agent 2
Discolite
Formaldehyde sodium sulfoxylate
formaldehyde sodium sulphoxylate
Formapon
Formopan
Hydrolit
Hydroxymethanesulfinic acid monosodium salt
Hydroxymethansulfinsaeure, natriumsalz
Leptacid
Leptacit
Methanesulfinic acid, hydroxy-, monosodium salt
MFCD00040426
MFCD00150599 [MDL number]
Natrium formaldehydesulfoxylat
Natrium hydroxymethansulfinat
Redol C
Rodite
Rongalit C
Rongalite C
Sodium methanalsulfoxylate
Sodium oxymethanesulfinic acid
Sodium sulfoxylate formaldehyde
Superlite C
UNII:X4ZGP7K714
甲醛次硫酸氢钠 [Chinese]
Rongalite is a chemical compound with the molecular formula Na+HOCH2SO2−.
This salt has many additional names, including Rongalit, sodium hydroxymethylsulfinate, sodium formaldehyde sulfoxylate, and Bruggolite.
Rongalite is listed in the European Cosmetics Directive as sodium oxymethylene sulfoxylate (INCI).
Rongalite is water-soluble and generally sold as the dihydrate. Rongalite and its derivatives are widely used in the dye industry.
IUPAC name: Sodium hydroxymethanesulfinate
Other names: Sodium formaldehydesulfoxylate, sodium oxymethylene sulfoxylate, Brüggolit
CAS Number
149-44-0
6035-47-8 (dihydrate)
Synthesis and reactions
Although available commercially, the salt can be prepared from sodium dithionite and formaldehyde:
Na2S2O4 + 2 CH2O + H2O → HO-CH2-SO3Na + HO-CH2-SO2Na
This reaction proceeds quantitatively, such that dithionite can be determined by its conversion to Rongalite, which is far less O2-sensitive and thus easier to handle.
The hydroxymethanesulfinate ion is unstable in solution towards decomposition to formaldehyde and sulfite.
Addition of at least one equivalent of formaldehyde pushes the equilibrium towards the side of the adduct and reacts further to give the bis-(hydroxymethyl)sulfone. Such solutions are shelf-stable indefinitely.
Sodium hydroxymethanesulfinate was originally developed in the early 20th century for the textile industry as a shelf-stable source of sulfoxylate ion, where the latter can be generated at will.
In use, when sodium hydroxymethanesulfinate is made acidic, the reducing sulfoxylate ion and formaldehyde are released in equimolar amounts.
For safety reasons the generation of formaldehyde must be taken into consideration when used industrially.
NaHOCH2SO2 can essentially be considered to be a source of SO22−.
As such it is used both as a reducing agent and as a reagent to introduce SO2 groups into organic molecules.
Treatment of elemental Se and Te with NaHOCH2SO2 gives solutions containing the corresponding Na2Sex and Na2Tex, where x is approximately 2.
As a nucleophile, NaHOCH2SO2 reacts with alkylating agents to give sulfones.
HO-CH2-SO2Na + 2 C6H5CH2Br → [C6H5CH2]2SO2 + NaBr + CH2O + HBr
Occasionally, alkylation will occur also at oxygen, thus α,α’-dibromoxylene gives both the sulfone and the isomeric sulfinate ester.
Use
The original use of the compound was as industrial bleaching agent and as a reducing agent for vat dyeing.
Another large-scale use is as a reducing agent in redox-initiator systems for emulsion polymerization.
One of the typical redox pair examples is t-butyl peroxide. A niche use is its use as water conditioner for aquaria as it rapidly reduces chlorine and chloramine and reacts with ammonia to form the innocuous aminomethylsulfinate ion.
It is also used as an antioxidant in pharmaceutical formulation.
Application
Rongalit C is mainly used as a discharging agent, color-discharging agent, reductant in printing and dyeing industry, as an activating agent for production styrene-butadise rubber and synthetic resin
Rongalit C can also be used to decolourize and bleach some organic matters. It is used as a bleaching agent in synthetic rubber, sugar-making, and food industries.
The compound has been used increasingly in commercial cosmetic hair dye colour removers despite the generation of formaldehyde, a known human carcinogen.
It has a variety of specialized applications in organic synthesis.
Related compounds
The zinc complex Zn(HOCH2SO2)2 is marketed under the trademarks Decroline, Decolin, and Safolin.
This compound is an additive in polymers and textiles.
Sodium hydroxymethanesulfinate is called Rongalite C.
Calcium hydroxymethanesulfinate is called Rongalite H.
Sodium hydroxymethanesulfinate
149-44-0
Rongalite
Rongalit
Sodium formaldehyde sulfoxylate
Sodium hydroxymethanesulphinate
Aldanil
Formapon
Formopan
Hydrolit
Methanesulfinic acid, hydroxy-, monosodium salt
Rongalite C
Rongalit C
Formaldehyde sodium sulfoxylate
Hydroxymethanesulfinic acid sodium salt
Sodium Sulfoxylate Formaldehyde (anhydrous)
Sodium hydroxymethylsulfinate
UNII-X4ZGP7K714
Sodium methanalsulfoxylate
Sodium sulfoxylate formaldehyde
Sodium (hydroxymethyl)sulfinate
Formaldehyde sodium bisulfite adduct
X4ZGP7K714
Discolite
Leptacid
Leptacit
Rodite
Superlite C
Bleachit D
Hydrosulfite AWC
Redol C
Methanesulfinic acid, 1-hydroxy-, sodium salt (1:1)
Sodium formaldehydesulfoxalate
SODIUM FORMALDEHYDESULFOXYLATE
Natrium hydroxymethansulfinat
Natrium formaldehydesulfoxylat
Sodium oxymethanesulfinic acid
MFCD00150598
HSDB 5648
Sodium formaldehyde sulfoxylate hydrate
NSC 4847
EINECS 205-739-4
Hydroxymethansulfinsaeure, natriumsalz
Formaldehydesulfoxylic acid sodium salt
Oxymethansulfinsaeuren natrium [German]
Oxymethansulfinsaeuren natrium
AI3-23202
Sodium sulfoxylate formaldehyde (anhydrous) [USAN]
CH3SO3.Na
DSSTox_CID_7120
EC 205-739-4
SCHEMBL6786
DSSTox_RID_78316
DSSTox_GSID_27120
sodium;hydroxymethanesulfinate
CHEMBL2107242
DTXSID7027120
Tox21_201133
8286AF
AKOS006230660
AKOS015898852
NCGC00258685-01
CAS-149-44-0
AK00588698
FT-0626524
R0053
J-008591
Q34928
Sodium formaldehydesulfoxylate (SFS) is a long name for a rather small molecule. It also goes by the name sodium hydroxymethanesulfinate or, most commonly, its trade name Rongalite. It is usually marketed as the dihydrate.
SFS has a long history:
In a short 1908 US patent assigned to Heyden Chemical Works (New York), Bruno R. Seifert and Otto W. Meves reduced formaldehyde and sulfur dioxide with zinc dust to a paste containing a zinc formaldehydesulfoxylate that could be converted to the sodium salt with sodium hydroxide or carbonate.
In a 1922 article, Frederick W. Heyl and Frank E. Greer of Upjohn1 (Kalamazoo, MI) reported an improved synthesis of a method described in a 1913 German patent. A mixture of formaldehyde and sodium hydrogen sulfite is treated with a mixture of zinc dust and zinc oxide. A convoluted purification process leads to acceptably pure SFS.
A 1935 patent by Frederick W. Binns at the Virginia Smelting Co.2 (Portland, ME) describes a similar synthesis that starts from zinc, sulfur dioxide, and formaldehyde.
Today SFS is manufactured from sodium dithionite (Na2S2O4) and formaldehyde.
It was originally developed as a treatment for mercury poisoning (hence its pharmaceutical origin), but that was of limited value.
Its current uses are in vat dyeing as a reducing agent, in redox polymerization initiator systems, and for aquarium water conditioning.
Hydroxymethanesulfinic acid is an organic acid. Sodium salt of hydroxymethanesulfinic acid (rongalite) is widely used in organic synthesis.
Sodium formaldehydesulfoxylate can be used as a reducing agent for elemental selenium and tellurium, diselenides, α‐halo ketones, and aromatic aldehydes; yields symmetrical sulfones with primary halides and with Michael acceptors.
Synonyms:
bleachit D
C.I. reducing agent 2
formaldehyde sodium bisulfite adduct
formaldehyde sodium sulfoxylate
formaldehyde sodium sulphoxylate
formaldehydesulfoxylic acid sodium salt
hydroxymethanesulfinic acid monosodium salt
hydroxymethanesulfinic acid sodium salt
leptacid
leptacit
methanesulfinic acid, 1-hydroxy-, sodium salt (1:1)
methanesulfinic acid, hydroxy-, monosodium salt
rodite
rongalit
rongalite
sodium (hydroxymethyl)sulfinate
sodium formaldehyde sulfoxylate
sodium formaldehyde sulphoxylate
sodium formaldehydesulfoxylate
sodium hydroxymethane sulfinate
sodium hydroxymethanesulfinate
mono sodium hydroxymethanesulfinate
sodium hydroxymethanesulphinate
sodium methanalsulfoxylate
sodium sulfoxylate formaldehyde
sodium sulfoxylate formaldehyde (anhydrous) [USAN]
superlite C
Sodium hydroxymethanesulphinate
EC Inventory
Sodium hydroxymethanesulphinate
Substance Evaluation – CoRAP
sodium hydroxymethanesulphinate
Pre-Registration process
CAS names
Methanesulfinic acid, 1-hydroxy-, sodium salt (1:1)
Other
IUPAC names
BRUGGOLITE E
Formaldehyde sulfoxylate Na
Methanesulfinic acid, hydroxy-, monosodium salt
Sodium formaldehyde sulfoxylate
sodium hidroximethane sulphinate
sodium hydroxymethanesulfinate
Sodium Hydroxymethanesulfinate Dihydrate
Sodium hydroxymethanesulfinate hydrate
SODIUM HYDROXYMETHANESULPHINATE
Sodium hydroxymethanesulphinate
sodium hydroxymethanesulphinate
sodium hydroxymethanesulphinate
sodium hydroxymethanesulphinate dihydrate
Sodium hydroxymethanesulphinate hydrate
sodium sulphoxylate
Trade names
Aldanil
Blankit C
Bleachit
BRUGGOLITE E
BRÜGGOLIT E
Formaldehyd-Hydrosulfit
Formaldehyd-Natriumsulfoxylat
Formaldehydsulfoxylsäure Natriumsalz
Formapan
Formopon
Formosul
Gobacit
Hydrolit
Hydrosulfite AWC
Hydroxymethansulfinsaures Natrium
Leptacid
Natriumformaldehydsulfoxylat
Natriumhydroxymethansulfinat
Natriummethanalsulfoxylat
Natriumsulfoxylatformaldehyd
Redol C
Reduktionsmittel SC 9152
Rodite
RONGALIT C
VETTALIT 1000 – RONGALITE
Sodium formaldehydesulfoxylate dihydrate Chemical Properties,Uses,Production
Chemical Properties
white crystalline powder
Chemical Properties
When freshly prepared, sodium formaldehyde sulfoxylate occurs as white, odorless crystals, which quickly develop a characteristic garlic odor on standing.
Uses
Pharmaceutic aid (preservative).
Production Methods
Sodium formaldehyde sulfoxylate is manufactured from sodium dithionate and formaldehyde in water.
Pharmaceutical Applications
Sodium formaldehyde sulfoxylate is a water-soluble antioxidant and is generally used as the dihydrate. It is used in the formulation of injection products at a level of up to 0.1% w/v in the final preparation administered to the patient.
Safety
The toxicological properties of sodium formaldehyde sulfoxylate have not been fully investigated. However, it is used in the formulation of injection products at a level to 0.1% w/v in the final preparation administered to the patient.
Sodium formaldehyde sulfoxylate is moderately toxic by ingestion, and when heated to decomposition it emits toxic fumes of sulfur dioxide and sodium oxide.
LD50 (mouse, oral): 4 g/kg
LD50 (rat, IP): >2 g/kg
LD50 (rat, oral): >2 g/kg
storage
Store in well-closed, light-resistant containers at controlled room temperature (15–30℃).
Incompatibilities
Sodium formaldehyde sulfoxylate is incompatible with strong oxidizing agents; it is decomposed by dilute acid.
Regulatory Status
Included in the FDA Inactive Ingredients Database (parenteral products up to 0.1% via the IM, IV, and SC routes). Included in the Canadian List of Acceptable Non-medicinal Ingredients.
Production method of sodium formaldehyde sulfoxylate
Abstract
The invention discloses a production method of sodium formaldehyde sulfoxylate.
In the production method, anhydrous sodium sulfite is firstly added in the concentration process of a prepared sodium formaldehyde sulfoxylate solution; and a sodium hydroxide solution or a soda ash solution is added before the prepared sodium formaldehyde sulfoxylate solution is concentrated.
The advantage is to provide a production method of odorless anhydrous sodium sulfite, thus the odor of free formaldehyde in products is eliminated, the odor generated because products are affected with damp and decomposed is eliminated, and moisture absorption, caking and decomposition of products are prevented, so that the storage stationary phase of the products is long and can be stored for a year under a closed state but not caked and stunk, and the product quality is improved; 35% of aqueous solution is transparent after the product is dissolved; and the production method is environment-friendly and clean, and is suitable for production of platy, blocky, powdered, granular and crushed sodium formaldehyde sulfoxylate products.
• Sodium dihydrate hydroxymethanesulfinate
• Formaldehyde Sodium Sulfoxylat
• Sodium formaldehydesulfoxylate hydrate (stabilised with sodium carbonate) for synthesis
• Methanesulfinicacid,hydroxy-,monosodiumsalt,dihydrate
• Sodiumformaldehydesulfoxylat
• SODIUM FORMALDEHYDE SULPHOXYLATE
• SODIUM HYDROXYMETHANESULFINATE DIHYDRATE
• HYDROXYMETHANESULFINIC ACID SODIUM SALT DIHYDRATE
• SodiumFormaldehydeSulfoxylatePure
• Hydroxymethanesulfinic acid sodium salt hydrate, 97%(dry wt.)
• Hydroxymethanesulfinic acid dihydrate monosodium salt
• Sodium sulfinomethanolate dihydrate
• formaldehyde sulphoxylate
• SODIUM HYDROXYMETHYLSULFINATE
• SODIUM SULFOXYLATE FORMALDEHYDE
• SODIUM FORMALDEHYDESULFOXALATE
• SODIUM FORMALDEHYDE SULFOXYLATE
• SODIUM FORMALDEHYDESULFOXYLATE DIHYDRATE
• RONGALIT(R) DIHYDRATE
• RONGALIT
• RONGALITE
• RONGALITE C
• RONGALITE DIHYDRATE
• RONGALITE(TM)
• FORMALDEHYDE SODIUM SULFOXYLATE
• FORMALDEHYDE SULFOXYLATE SODIUM
• FORMALDEHYDE SULFOXYLATE SODIUM DIHYDRATE
• HYDROXYMETHANESULFINIC ACID, MONOSODIUM SALT DIHYDRATE
• HYDROXYMETHANESULFINIC ACID SODIUM SALT
• Sodium sulfoxylater formaldehyde
• Sodium formaldehydesulfoxylate dihydrate,98%
• SodiuM forMaldehydesulfoxylate dihydrate, 98% 1KG
• SodiuM forMaldehydesulfoxylate dihydrate, 98% 50GR
• SodiuM forMaldehydsulfoxylatehydrat (sta
• HydroxyMethanesulfinic acid MonosodiuM salt
• Methanesulfinic acid,hydroxy-, MonosodiuM salt, dihydrate (8CI,9CI)
• SodiuM forMaldehydehydrosulfite
• 6035-47-8
• CH3NaO3S2H2O
• CH3O3SNa2H2O
• CH7NaO5S
• CH3NaO3SxH2O
• HOCH2SO2Na2H2O
• Organic Building Blocks
• Sulfonic/Sulfinic Acid Salts
• Sulfur Compounds
• Building Blocks
• INORGANIC & ORGANIC CHEMICALS
• printingn raw material
SODIUM FORMALDEHYDE SULFOXYLATE (SAFOLITE)
Colour discharge printing agent on cotton and synthetic fabrics
Soluble in water.
Provides a unique versatility of printing on both cotton and synthetics due to the exceptional stability over long periods and high compatibility with various print systems.
Excellent production due to strong reduction power.
Excellent definition of Discharge prints.
Field of application: As a discharge agent in textile printing, as redox catalyst in polymerisation process for manufacturing polymer and as an antioxidant in drug formulations.
Chemical Basis: Sodium Formaldehyde Sulfoxylate
Ionic Character:
Form: Crystalline powder
Alternate Names
ALBALITE C
METHANESULFINIC ACID, HYDROXY-, MONOSODIUM SALT
MONOSODIUM HYDROXYMETHANESULFINATE
NSC-4847
SODIUM FORMALDEHYDE SULFOXYLATE
SODIUM FORMALDEHYDE SULFOXYLATE [II]
SODIUM FORMALDEHYDE SULFOXYLATE [MART.]
SODIUM FORMALDEHYDE SULFOXYLATE [MI]
SODIUM FORMALDEHYDE SULPHOXYLATE
SODIUM FORMALDEHYDESULFOXYLATE
SODIUM OXYMETHYLENE SULFOXYLATE
SODIUM OXYMETHYLENE SULFOXYLATE [INCI]
SODIUM SULFOXYLATE FORMALDEHYDE (ANHYDROUS) [HSDB]