October 5, 2024
PET

PREVENTOL BIT

PREVENTOL BIT

PREVENTOL BIT

CAS: 2634-33-5

PREVENTOL BIT Product Applications:
Material protection

Take a look to PREVENTOL BIT products:

PREVENTOL BIT 20 N properties:
-PREVENTOL BIT 20 N is an aqueous-glycolic solution of 1,2-Benzisothiazolin-3-one (BIT).
-PREVENTOL BIT 20 N is used for the preservation of aqueous coatings, polymer dispersions, plasters, synthetic adhesives, pigment slurries, concrete additives or cleaners and detergents.
-PREVENTOL BIT 20 N has a broad spectrum of activity covering bacteria, mould and yeasts.

Uses of PREVENTOL BIT 20 N:
PREVENTOL BIT 20 N is sused for the preservation of aqueous technical preparations such as polymer dispersions, aqueous coatings, plasters, synthetic adhesives, pigment slurries, concrete additives, or cleaners and detergents.

What is PREVENTOL BIT 20 N?
PREVENTOL BIT 20 N is an almost clear, yellow to orange liquid of 1,2-benzisothiazolin-3-one in dipropylene glycol/water.

BIT (HPLC): min. 20.0 % 1,2-benzisothiazolin-3-one

Density (20 °C): approx. 1.14 g/cm3
Vapour pressure:
(20 °C): 19 mbar
(50 °C): 65 mbar
Boiling point: 103 °C
Flash point: undetermined (aqueous system)
pH (10 %): approx. 10.7
Viscosity (20 °C): approx. 268 mPas
Solubility: miscible with water in any ratio
Ignition temperature: 375 °C

Applications of PREVENTOL BIT 20 N:
Preventol BIT 20 N is an aqueous/glycolic preparation of the biocidal active ingredient benzisothiazolinone, and has a broad spectrum of activity against bacteria, mold fungi and yeasts.
In the form supplied, Preventol BIT 20 N has a light-yellow to yellow color, which is particularly advantageous for applications in which the risk of discoloration must be ruled out.
The good water solubility of this preservative enables simple and problem-free incorporation in the concentration ranges recommended for preservation.
Preventol BIT 20 N can be used over a wide pH and
temperature range (up to pH 14 / T approx. 80 °C ) and thus permits broad and flexible use.
In many cases, it can be added at an early phase of the production process in order to benefit from the positive influence of a preservative on process hygiene right from the outset.
In this context, even if subsequent heating takes place, loss of active ingredient generally need not be anticipated due to the low volatility and good thermal stability of benzisothiazolinone.
For the purpose of achieving a reliable and uniform effect, homogeneous distribution in the products to be protected must be ensured.
This must be achieved by taking suitable measures in production (stirring, agitating, etc.).

Suggested additions of PREVENTOL BIT 20 N:
Glues and adhesives 0.05 – 0.25
Emulsion paints 0.05 – 0.25
Polymer dispersions 0.05 – 0.25
Concrete additives 0.1 – 0.25
Pigment slurries 0.02 – 0.15
Cleaners, detergents 0.05 – 0.20

Precautions of PREVENTOL BIT 20 N:
Avoid skin contact with Preventol BIT 20 N as well as the inhalation of vapors.
The precautions generally recommended for handling chemicals must be observed, e.g. wearing of protective clothing, safety goggles and protective gloves.
If the product comes into contact with the skin, the affected area should be washed immediately with plenty of water and soap; splashes in the eyes should be rinsed out immediately with plenty of water.
If irritation persists, medical attention should be obtained.
Contaminated clothing should be changed immediately.

Storage of PREVENTOL BIT 20 N:
Stored properly in sealed original containers, the product has a shelf life of 1 year.
Avoid storage temperatures below – 10 °C or above 40 °C.

PREVENTOL BIT 10 properties:
PREVENTOL BIT 10 is an aqueous, alkaline solution of 1,2-Benzisothiazolin-3-one (BIT).
PREVENTOL BIT 10 is used for the preservation of aqueous technical preparations such as polymer dispersions, aqueous coatings, plasters, synthetic adhesives, pigment slurries, concrete additives, or cleaners and detergents.
PREVENTOL BIT 10 has a broad spectrum of activity against bacteria, mould and yeasts.
PREVENTOL BIT 10 is VOC- and solvent-free.

PREVENTOL  BIT TD properties:
PREVENTOL  BIT TD is a liquid preservative based on 1,2-Benzisothiazolin-3-one (BIT) and Tetramethylolacetylenediurea (TMAD).
PREVENTOL  BIT TD is used for the preservation of aqueous technical preparations such as aqueous coatings, plasters, polymer dispersions, synthetic adhesives, pigment slurries, concrete additives or cleaners and detergents.
PREVENTOL  BIT TD has a broad spectrum of activity covering bacteria (aerobic and anaerobic), mould and yeasts.
The often slow onset of action of benzisothiazolinone is accelerated by the added TMAD, particularly in the case of bacteria.

PREVENTOL BIT IT properties:
Preventol BIT IT is formaldehyde-free, in-can preservative based on benzisothiazolinone and monovalent-stabilized isothiazolinones.
PREVENTOL BIT IT is used for the preservation of aqueous coatings.
PREVENTOL BIT IT is developed to enable H317 free preservation as an alternative to MIT based preservatives.
The optimized ratio allows using this combination for products in accordance to Ecolabel and Blue Angel.
PREVENTOL BIT IT offers broad spectrum of activity against bacteria, mold fungi and yeasts.
PREVENTOL BIT IT shows alkaline stability up to pH 10 and thermal stability up to 60°C.
PREVENTOL BIT IT contains no organic solvents and does not add to the VOC content of the products it protects.
PREVENTOL BIT IT is suitable for low emission interior paints.
The shelf life of PREVENTOL BIT IT is one year.

PREVENTOL BIT 20 D properties:
PREVENTOL BIT 20 D is formaldehyde- & halogen-free, in-can preservative based on benzisothiazolinone.
PREVENTOL BIT 20 D is used for the preservation of aqueous coatings.
PREVENTOL BIT 20 D is a water-based, solvent- and VOC-free dispersion, it is further supported by the approval of BIT up to a dosage of 200 ppm (=0.10%) according to German Blue Angel (RAL-UZ 102).
PREVENTOL BIT 20 D offers broad spectrum of activity against bacteria, mold fungi and yeasts.
PREVENTOL BIT 20 D provides high alkaline stability, can even be used at very high pH values (>10).
Also, displays outstanding thermal stability combined with low volatility.
PREVENTOL BIT 20 D is free of organic solvent and is suitable for low-emission paints for interior applications.
PREVENTOL BIT 20 D possesses good thermal and chemical stability.
The shelf life of PREVENTOL BIT 20 D is two years.

The PREVENTOL product line is a group of biocidal products, under which we find both active substances and finished formulations, which protect the final products from biological attack by bacteria, fungi or algae and thus prolong their life and maintain their functionality.
PREVENTOL products are widely used in the following applications in the field of coating and building materials production .
Protection or preservation of the finished product in the packaging ( In Can ) and protection of the dry film ( Dry Film Protection ) of applied materials on the mineral surface or wood.
Last but not least, we find the use of biocidal products also in the hygiene and disinfection of production ( Plant Hygiene ) of the above materials.

PREVENTOL BIT, BIT IT, D, DP, DBC, P is a combination of active substances BIT, CMIT / MIT, Bronopol, DBDCB, or others and offers a range of features that meet the highest demands for In Can protection while fully complying with current legislative standards and limits.
PREVENTOLS, which is one of the world’s leading manufacturers of biocidal active substances and preparations.
PREVENTOLS offers a wide range of products across key industrial applications.
PREVENTOLS constantly develops and invests in research and development of innovative materials, draws on many years of technical, microbiological and legislative experience and emphasizes production that meets high demands on environmental standards.
PREVENTOLS is available to its customers with application technology laboratories and legislative experts.

BASIC PROPERTIES AND CHARACTERISTICS of PREVENTOLS:
-broad-spectrum and fast-acting protection
-excellent efficiency at low concentrations
-without FA / MIT / OIT content
-without H317 marking on the product packaging
-long-term and high efficiency
-good chemical compatibility
-without VOC content
-possibility of marking with the “EKO” mark

APPLICATION AND USES OF PREVENTOLS:
-all water-soluble systems (paints, plasters, adhesives, sealants)
-hygiene of operation and production equipment
-technological and rinsing water disinfection

Synonyms:
aqueous solution of Benzisothiazolinones
BIT
PREVENTOL BIT 10

Inquiry